It is also suitable for piling, dock and other constructional work. Macrocarpa machines and turns well owing to its fine texture. Grain is interlocked, with a medium texture and a waxy feel. This was the trading post for bushmen and kauri gum diggers in the 1890's. Colensoa physaloides Koru NZ hydrangea. Pre-bore for nailing, glues without difficulty and stains and wax polishes easily. Working Qualities Similar to European larch in that it saws, machines and finishes well but it tends to split on nailing and therefore drilling is  ecommended particular at board ends. Radiata Pine is very easily worked with standard tools, although its knotty character and resin canals can cause premature blunting cutters. Sustainability information. Tends to be difficult to work on account of its density and interlocked grain. It is suitable for high grade joinery, interior fittings, window frames, doors, staircases, heavy furniture and laboratory benches, bank and shop fittings, boat and vehicle building, wagon work and flooring. Good staining and polishing qualities. The timber seasons fairly slowly with a tendency to check and split. Sizes available: 50 mm, Durability: Non-Durable The grain is generally straight and the texture varies from coarse to medium coarse. Colour: Dark Solid Timber Flooring : NZ Hard Oak, Elm, Ash, Maple, White Stringybark, NZ Red Gum, Miro, Matai, Rimu, Beech, White Oak, French Oak, Guinea Teak, Kwila, Jarrah, Walnut Naturally resistant to insect and fungal attack. Colour varies from light beige to light brown, often with a pinkish tinge. Saws well, however with the fairly high incidence of gum, saws tend to become clogged. Yellow brown timber which will turn red brown with age. Used extensively in Europe for domestic woodware, tool handles and flooring. Heavier sizes can be air dried to prevent surface checking. according to country of origin. The heartwood is dark brown with fine, close blackish veining giving the wood a handsome appearance. General utility timber for interior joinery and finishing. Dries fairly easily and without undue degrade, although there is some tendency to cupping. Cordyline banksii. Excellent for flooring and very suitable for gymnasium equipment, shafts, tool handles, boat building, turnery, furniture and billiard tables. Inclined to split when nailed near ends of piece. Bole 50-80 ft long, cylindrical, diameter 20-35 inches. Dries fairly easily and without undue degrade. Sharp cutters will also help create a nice finish. The texture is fine and even and there is a pronounced cedar-like smell when freshly cut. Fine furniture, high class joinery, boat interiors, musical instruments. Cordyline australis Ti Kouka. Cumaru has excellent durability and weathering properties. Works with moderate ease with most hand and machine tools and finishes well. Silver Beech. Colour: Light Sawn timber is graded on a one face heart basis. Gifted with both strength and appearance, the timber has a wide range of uses. Relatively easy to dry but the tangential surface is prone to surface checking. The timber works easily and well with both hand and machine tools. Heartwood is a pale pinkish brown and the sapwood is almost white. BTR: It looks like polished Rimu to me. It holds nails and screws well, glues and finishes smoothly to a surface ideal for painting, varnishing or polishing. Care is needed in dressing because the softer early wood may be compressed and later, on recovery, produce a ridged surface. Large trees can be between 700-1000 years old. Finishes well and can be glued, screwed, stained satisfactory. The timber planes and machines well and is easy to cut across the grain. BTR: It looks like polished Rimu to me. Furniture, veneer, cabinet work, rifle butts, panelling, musical instruments and knife handles. Extremely difficult Face graded for heart content and then generally to a minimum of 75% to 80%. Colour: Medium A very heavy hard timber, suitable for use under exacting conditions. It may not be easy to get a match to either the timber or the profile, as well as there being variation from supplier to supplier in overall thickness and width back when this was commonly used, the tongues and grooves may be different depths and thickness and position relative … Native timber and wood New Zealand native woods. A light timber with a distinctive odour, it is non-resinous and straight grained, with obvious growth rings. Sizes available: 25, 50 mm. Although requiring a grain filler the wood takes stain well and gives good results with polish. Once kiln dried, gum exudates are not a serious problem in machining; glues and polishes well. Presence of silica can be very hard on tool. Colour: Medium Suitable for furniture and cabinets, joinery, paneling, construction mouldings and decking. Farm Forestry Timbers - Headlines. Care needed when planning, cross-cutting and drilling to prevent chipping out. Due to its high oil content and density, Cumaru can present difficulties in gluing, and pre-boring is necessary when screwing or nailing the wood. Building construction, scaffold planks, fascia boards, weatherboards (when treated), flooring, framing, joinery, kitchen furniture, boat building, domestic woodware, mouldings, casks and boxes. It finishes well and takes an excellent stain and polish. Steaming which reduces the tension in the timber is normally introduced. Selected logs converted into plywood and decorative veneers. Used for steam bent boat parts in place of oak. Durable. Also used in the manufacture of ice cream spoons and cocktail sticks, toothpicks etc. Heartwood colour is white to pale yellow with the sapwood indistinguishable. Planning is not difficult despite the high density of the wood and interlocked grain. Sapwood is white to pale yellow. Requires care in kiln drying to avoid distortion and degrade. Heartwood is reported to be very durable, resistant to subterranean termites, and fairly resistant to dry-wood termites. With over 30 species in stock choose the timber that suits your project. North America also Plantations in New Zealand. Its open grain structure readily accepts preservative treatment, which can provide protection to the highest level. App users can identify the native tree (shrub, fern or palm) they're looking at by matching its foliage, flowers or bark with simple picture icons on a menu, Gillman says. Second growth timber has a wide sapwood of a grayish-pink colour which is sliced for decorative veneers for panelling and furniture. Dries slowly with a tendency to surface check. However, the wood contains silica and will have a moderate blunting effect on tool cutters. It takes nails and screws, and glues well and is a very good base for all coatings including stains, paints and varnish. Case studies; Learning centre; Timber Design Awards; Forestry; News and events; Suppliers; FAQs; About; In this section. Manufacturers, Supplier, New Zealand biggest Swamp Kauri Supplier and Manufacturer, Importers and Distributors of Native New Zealand exotic and imported timbers including flooring, decking, sleepers, furniture making Cabbage tree, Dacrycarpus dacrydioides Kahikatea White Pine, Metrosideros excelsa Pohutukawa NZ Christmas tree. 80% of our trees, ferns and flowering plants are endemic (found only in New Zealand). The timber is dull with an oily feel and has a unique scent when freshly cut. The wood is hard and heavy, the texture is moderately coarse but even and the grain may be straight or interlocked and is often wavy. The wavy grain produces a beautiful fiddle-back figure. Colour: Light The timber is easily worked with hand or machine tools and when planed comes to a very smooth clean finish however the presence of very small tight knots may cause some difficulties. The timber machines and finishes well and the wavy grain can produce an attractive fiddle back figure. Please acknowledge the photographer (Tony Foster) or bushmansfriend.co.nz To use these photos or images for commerce contactbushmansfriend.co.nz © 2020 Bushmansfriend | Website by eDIY, Phyllocladus trichomanoides Tanekaha Celery Pine, Pomaderris kumaraho Kumerahou, Gumdiggers soap, Prumnopitys taxifolia, ferruginea: Matai & Miro, Pseudowintera colorata Horopito peppertree, Hedycarya arborea Pigeonwood, Porokaiwhiri. Skip to content . Henderson, Auckland, CHRISTCHURCH Māori prized the timber of this tree and used it totara to carve waka, and build tools and housing. kauri, rimu, totara, mangrove, tawa, and many more. Colour: Medium Can have a greenish tinge when freshly cut. It is fairly close textured with interlocked grain.

Hamdard University Career, Dana Gaier Despicable Me, Kannur To Pariyaram Medical College, Ras47 Pistol Brace Adapter, Pembrey Country Park Caravan Site, Fort Scott Tribune, Odisha Police Recruitment 2021, Fn 509 Owb Holster, Skoda Rapid Long Term Ownership Review Team-bhp, Secretary Of State Nonprofit Search,